Respironics Pure White 6 Foot Performance CPAP/BiPAP 19mm Diameter Tubing with 22mm Ends

Compatible with nearly all CPAP, APAP, BiPAP and BiLevel systems for every manufacturer on the market, Respironics’ new Pure White Performance 19mm Diameter Tubing with 22mm Ends is 20% lighter and much more flexible than standard tubing.

• Performance Tubing is 20% lighter and many times more flexible than standard tubing. It works well with smaller lightweight masks, as it is less likely to pull on the mask and disrupt the seal.
• The ergonomically designed cuff is easier to grasp and remove from the mask or machine.
• With a standard 6-foot length, cuff diameter and wall thickness, Performance Tubing can be easily substituted for standard tubing.
• It’s not just for Respironics CPAP/BiPAP systems. Performance Tubing will work with all ResMed S6, S7, S8 and VPAP systems as well as many systems from DeVilbiss, Fisher & Paykel, Puritan Bennett and others.
• Performance Tubing is pure white in color. No more boring, drab and dreary gray for your CPAP tube.

Consider this low cost alternative: White 6 Foot Performance 19mm Tubing with 22mm Easy Grip Cuffs .

General Tips Section

Hose Diameters

The original or ‘standard’ diameter for a hose used with CPAP therapy is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as “Thin” or “SlimLine™” and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.

This hose, the Respironics Pure White 6 Foot Performance CPAP/BiPAP 19mm Diameter Tubing with 22mm Ends, is a standard diameter size, non-heated hose. It is compatible with machines that can use a 22mm hose. It is not compatible with a machine that can use only a 15mm hose or only a heated hose.

Other Notes

All Respironics hoses are smooth bore designed. Smooth bores have no ridges inside the hose for air pressure to resist against. The supportive wire frame is located on the outside of the hose. This design provides consistent pressure delivery and ensures a quieter performing hose.

The Respironics Performance 19mm Diameter Hose with 22mm Ends does not have a pressure sensor line, which allows you to connect certain CPAP/BiPAP machines that measures pressure in the mask. Please select the 6 Foot CPAP Hose for Puritan Bennett 420E, 420S, 425 and Knightstar 330 if you need a universal 6 foot hose with a pressure line.

1032907